Shop our limited edition earrings today and make a positive impact on the planet with eco-friendly jewelry.
Inspired by the concept of infinity and eternity, our designer Sogand Nobahar created a mesmerizing circular motion design with free hoops that symbolize the idea of “eternal return.” The circular movement can be hypnotic and perpetual, taking us back to where we started. The sense of touch was integral to this design, allowing users to feel and play with the hoops. Our designer has also personally handled the post-production and coloration process. We achieved most of the colors using natural dyes, making each piece unique.
Waste-Free and Low-Carbon Jewelry Production
Our sustainable design pieces are produced using a combination of eco-friendly techniques. Our primary material is Polyamide 12 (PA12), which is used with the Selective Laser Sintering (SLS) technique to create our jewelry pieces. This waste-free process has a low carbon footprint in comparison to traditional jewelry production. Unlike traditional methods, we don’t use water, cutting fluids, oils, or dielectrics. Furthermore, energy is only consumed during the machine’s processing of raw materials into part geometry.
PA12 is the ideal material for SLS technique due to its weight and strength. The technique allows for the creation of lightweight components with high strength-to-weight ratios. By using PA12, we can produce hollow structures, honeycomb structures, or structures filled with optimized micro-lattices, which reduces embedded CO2 during the product lifecycle phase.
Coloration
We use natural dyes and spices, such as turmeric, red rose, black tea, coffee, and etc to achieve the colors naturally for our pieces in and around our studio. If natural dyes are not possible, we use textile dyes or acrylic paints for specific effects.
Storage
To maintain the integrity of the product’s color, we recommend storing the item in its box when not in use. Direct sunlight can cause the color to change slightly over time.
Handle and Care
3D printed parts
Our 3D printed parts are made from sintered nylon powder and dyed using a manual process. Due to the inherent variability of this process, the color may vary slightly between products. Sintered nylon is heatproof up to 80℃ degrees, and higher temperatures may significantly alter material properties. Please avoid exposing the product to direct sunlight for more than 15 minutes. Do not wear the jewelry during showering or swimming. To clean, use a slightly damp cloth and handle with care. For darker spots, a mild detergent, such as antibacterial soap, can be used. Use the cloth provided or a neutral-colored cloth, and avoid aggressive detergents or substances such as alcohol, acetone, or bleach.
925 Silver
To prevent tarnishing, it’s best to wear your silver jewelry regularly as the oils in your skin will “clean” the silver. Avoid contact with household chemicals, chlorinated water, or any substances that contain sulfur (e.g., mayonnaise, eggs, mustard, onions, latex, wool). Remove silver jewelry when doing household chores. Direct sunlight and lotions, cosmetics, hair spray, hair products, and perfumes can also cause tarnishing, so avoid exposing your silver jewelry to these substances. Cleaning can be done using a homemade solution of water and detergent, baking soda, salt with aluminum foil, or toothpaste. A silver polishing cloth formulated specifically to remove tarnish is also effective.
